LITEFORM
New reinforcement system for conventional slabs and on site casted slabs
• It has been designed to reduce installation time and to improve safety on construction sites.
• All components can be handled by a single person due to its low weight.
• The modularity of the system, accompanied by a reduced number of accessories, allows to realize any slab geometry. The use of the quick dismantling head facilitates the recovery of all the formwork panels after just 2 or 3 days for immediate reuse in the next phase.
• The safety aspect of this system were treated especially during the design stage. LITEFORM panels are assembled from below. The surface is made of aluminium and consists of a frame of profiles that even lets you operate on top without a plywood coating.
• To improve operations and safety, the surface of the LITEFORM has been milled; this allows people to work safely even on wet surface.
 
Components

N. 1 Aluminium Panel 1000x2000
N. 1 Aluminium Panel 750x200
N. 1 Aluminium Panel 500x200
N. 1 Infill element 1800
N. 1 Infill element 1200
N. 1 Steel Prop
N. 1 Quick Dismantling Head
N. 1 Fixed Head
N. 1 Guardrail post

A set of accessories is available, in support of the range, to allow a simple and rapid storage of all components to maximize space and handling in the construction site and during transportation.

Working phases:
1. Once positioned the props with the quick dismantling heads, the assembling of the LITEFORM panels can be done until completion from bellow.
2. The installation of prefabricated slabs or bricks can be done in complete safety from the working surfaces.
3. Once the casting has been done and after a minimum concrete consolidation, we can proceed with the recovering of the panels ready for the next phase, just with a single hammer blow to lower the quick dismantling head.